EQUIPMENT TYPE
Ball Valve
Design and Features:
- API 6D, BS 6755 T2, API 6FA and API 607 certified
- Size available: ½” to 56”@ ANSI 2500
- Double/ Single Piston Effect
- Full/ Reduce Bore
- Double Block and Bleed
- Double Piston Effect
- Anti-Blow Out Stem
- Anti-Static Design
- Emergency Sealant Injection
- Fire Safe
- SIL 3 certified
- Fully Welded/ Split Body Design
- Primary Metal Secondary Soft (PMSS) Seat
- Extended Stem for underground application
- Electric/ Pneumatic/ Hydraulic Actuated
- Various material are available
GALLERY
Axial Control Valve
Design and Features:
- Design according to API 6D
- Axial design with low pressure drop
- Mirror finishing piston for low friction and excellent sealing
- Fast stroking time
- Linear, Equal Percentage or customize flow characteristic
- Fully Welded forged body construction
- Size available: 2” to 36” @ ANSI 900
- Electric/ Pneumatic/ Hydraulic Actuated
GALLERY
Axial Check Valve
Design and Features:
- Design according to API 6D
- Axial design with non-slam
- Spring design for quick reaction
- Metal to metal sealing with hard faced stainless steel
- Fully Welded forged body construction
- Size available: 1” to 36” @ ANSI 1500
GALLERY
Valve Automation
Design and Features:
- Range of product:
– Scotch Yoke Actuator (200 Nm to 600,000 Nm)
– Rack and Pinion Actuator (10 Nm to 12,000 Nm)
– Linear Actuator (upto 5,000 kN) - Pneumatic Control:
– Natural Gas Control
– Gas Over Oil Control
– Electro-Hydraulic Control
– Special customize (e.g. solar) - Fast strike time (< 1s)
- ATEX, GOST, PED compliance
GALLERY
Quick Opening Closure
Design and Features:
- Bayonet Design
- Size available: 3” to 64” @ ANSI 2500
- Available in various material
- Single Man Operation
- Enhanced Safety Features:
– Active Safety Feature with Pressure Locking Device preventing initializing of opening sequence under pressurize condition
– Locking Pin to prevent opening of the Door and Venting of residual gas pressure via ball valve
– 2 Step Operating Lever ensure no accidental opening of Door
– Security Notch prevent door open fully
GALLERY
Monolithic Insulation Joint
Design and Features:
- Size available: ½” to 102” @ ANSI 2500
- Suitable for Gas, Oil, Water, etc.
- Triple Sealing System
- Various piping material option
- Seals material: NBR according to ASTM D 735 or FPM according to ASTM D 2000
- Insulating Ring material: NEMA X (Etronit) up to NEMA G 10/11 (Glass fibre)
- Dielectric test 5,000 V to 11,000 V
- Resistance minimum of 25 mega Ohm
- Bending and Torsion Test
- Finite Element “Limit Load” analysis
- Temperature Cycling Test (-45/ +50 deg C)
GALLERY
Hot Tapping/ Plugging Tee
Design and Features:
- Hot Extruded Tees
- Welded Branches
- Tees with Guide Bars
- Sphere Tees for special pigging application
- Size available: customize
- Pressure rating: customize
- Various piping material option
GALLERY
Customized Cylinder Tube
Design and Features:
- Material: P355NL1 (1.0566) / 3.2 acc. to AD2000 W1/W4/W10
- Seamless or Welded
- Tolerance of inner diameter acc. to ISO fit H10
- Inner surface: roughness Ra ≤ 0.4
- Length tolerance acc. to DIN 2769T1 medium, other tolerances upon request
- Upon request, two-layer hard chrome-plated, minimum 25 µm
- Highest wear and corrosion resistance
- Inside Diameter from 50mm to 1000mm
- Size = or >450 mm, tubes longitudinally welded 100% ultrasonic tested
GALLERY
Ultrasonic Gas Flowmeter
Design and Features:
- Six path ultrasonic measurement
- No moving parts
- Full bored with negligible Pressure loss
- Size : 3“ to 24“
- Pressure Rating : up to #600
- Ex proof certified
- IP65 protection
- -40 to 60 °C ambient temperature
- 2 HF and 3 Serial Outputs
- Verifiable during operation
- 4 in 1 meter : USM Flow measurement, Pressure, Temperature and Volume Corrector
- Data memory
- Certified for Custody Transfer Application
- OIML R137:2012 Class 0.5
GALLERY
